Functions / Features
- Plastic housing
- Device for installation on 35 mm profile rail (4 modular units)
- IP20 protection rating (device installed)
- ON/OFF control and brightness adjustment of individual or grouped lighting fixtures, Tunable White and DimToWarm
- Selection of PWM output frequency from ETS from 250 Hz to 6 kHz
- Fade-in and fade-out time, minimum and maximum brightness level, linear or logarithmic adjustment curve settable from ETS
- Soft or instant on/off, with settable delay
- Possibility of parallel connection of outputs to increase output power
- Configuration of behavior after power restoration, bus ON/OFF, download via ETS
- Channels can be set from ETS as independent, parallel, or Tunable White
- Lock function, forced operation, staircase light, scenarios, night mode, meter, and logic functions for each channel, settable from ETS
- Power failure alarm
- Manual control with membrane buttons for local ON/OFF testing of channels 1-2-3-4: in manual mode, briefly pressing the button for a channel activates/deactivates the load; pressing for at least 2 seconds causes the load to flash approximately every 1 second
- Relay contact for switching off the AC/DC power supply when the 12/24/48 Vdc outputs are off, or alternatively as a relay for auxiliary output
- Auxiliary output function via relay with status indication via KNX
.png)
