16-fold binary output / 8-fold blind actuator

DIN-Rail mount modules

CODE: EK-FF1-TP

Description

The Ekinex® EK-FF1-TP binary output / blind actuator allows to command 16 groups of loads or control 8 drives for motorised blinds independently. The device is fitted with membrane pushbuttons for manual command (even in the absence of bus power) and LED’s for status indication; a pushbutton allows to switch between automatic and manual operation modes. The device integrates a KNX bus communication module and is realized for mounting on a standard 35 mm DIN-rail. The device is supplied by the KNX bus and requires an additional 230 Vac power supply to operate.

Technical data
Power supply 
  • Voltage auxiliary 100-230 Vac 50/60 Hz
  • Voltage control section 30 Vdc by KNX bus
  • Current consumption from bus < 10 mA
  • Power on bus < 240 mW
Outputs
  • Number: 16 or 8 independent channels (depending on device use)
  • Nominal voltage (Un): 100-230 Vac 50/60Hz
  • Nominal current (In): max 16 (10) A (both @100Vac and @230Vac)
  • Max. switched power: max 4000 VA @250Vac
Delivery
Delivery includes a terminal block for connection to the bus.
Functions / Features
  • Plastic casing
  • Frontal programming pushbutton and LED
  • Membrane keyboard with LED’s for status indication
  • Pushbutton for switching operating mode (normal / programming)
  • Connection to bus line with KNX terminal block
  • Connection of outputs and 230 Vac power supply with screw terminals
  • Overvoltage class III (according to EN 60664-1)
  • Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2)
  • Pollution degree 2 (according to IEC 60664-1)
  • Installation on 35 mm rail (according to EN 60715)
  • 8 modular units (1 MU = 18 mm)
  • IP20 protection degree (installed device)
  • Weight 595 g
Configurationa and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKFF1TP##.knxprod (## = release). 

STEKFF1TP_EN
  • v. 2.1 (07/09/2021)
  • PDF | 748,7 KB
  • Download
FISPFEF1TPIEXX3
MAEKFE1FF1TP_EN
  • v. 3.5 (12/04/2024)
  • PDF | 3,3 MB
  • Download
APEKFF1TP
  • v. 0.5 (02/05/2024)
  • ZIP | 2,4 MB
  • Download
CEEKFF1TP
  • v. 1.0 (20/01/2019)
  • PDF | 843,1 KB
  • Download
UKCADCEKFE1FF1TP
  • v. 1.0 (07/06/2024)
  • PDF | 420,5 KB
  • Download
KNX_Certification_EK-FF1-TP
DSEKFF1TP
close
Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di piú o negare il consenso a tutti o ad alcuni cookie, consulta la sezione cookies. Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all'uso dei cookie.