Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module)

Hotel solutions

CODE: EK-E13-TP-.. | EK-TH2-TP

  • Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card holder for 2-fold plate (60x45 mm module)
  • Form
  • Flank
  • 'NF
  • Deep
  • Surface
  • 3D view
Description

The 4-fold pushbutton of Ekinex® 71 series commands loads on/off switching, controls the dimming of lighting devices, controls motor drives for shutters or executes any other programmable command and control function. Thanks to the integrated temperature sensor, the pushbutton can work as a thermostat for a room or a zone. The LED can be chosen in the colour combinations blue / green or white / red. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is powered by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.

Technical data
  • 30 Vdc power supply by KNX bus
  • Current consumption from bus < 15 mA
Delivery

Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

  • set of 1 square rocker, 2 vertical rectangular rockers, 4 square rockers or 4 horizontal rectangular rockers 
  • double frame Form or Flank version
  • double plate with 60 x 45 mm window
  • a plastic adapter
  • metal support for installation onto round or square mounting box (fixing holes 71 mm apart)
Code LED colours Mounting
EK-E13-TP-BG blue / green with double frame Form or Flank version, without frame (‘NF version)
EK-E13-TP-RW red / white
Card holder

The Ekinex® EK-TH2-TP card holder with RFID technology is used for presence detection in combination with the EK-TR2-TP card reader. It is equipped with a bistable relay (4A@24Vac/dc), an input for potential-free contacts and a front signalling LED (white). The device has an integrated KNX bus communication module and is designed for mounting in a flush-mounted wall box; it is supplied with SELV voltage via the KNX bus and requires a 12-24 Vac/dc auxiliary power supply.

Technical data
  • 30 Vdc power supply via KNX bus
  • Auxiliary power supply 12-24 Vac/dc
  • Current consumption from bus < 10 mA
Delivery

The scope of supply includes a terminal for connection to the bus line and two pairs of screws.

Accessories

Smart-card EK-TCE-10 (Ekinex® logo in black, pack of 10 cards) or EK-TCC-10 (customised with customer logo, pack of 10 cards)

Functions / Features
Pushbutton
  • 4-fold (possibility to configure up to 8 independent functions)
  • 4 freely programmable LED for each channel
  • 2 colour combination available for the LED (blue / green or red / white)
  • Room thermostat function
  • Integrated temperature sensor
  • Plastic casing
  • Connection to bus line with KNX terminal block
  • Frontal programming pushbutton and LED
  • Wall-mounting installation on round or square wall box
  • IP20 protection degree (installed)
  • Weight 70 g (with mounting support)

 

Card holder
  • Presence detection via bus and communication to supervisory system via KNX TP bus (twisted pair)
  • Presence enabling after insertion of card in front pocket
  • Accommodation guest management based on reservation and check-in/check-out period; service user management based on time slots and passe-partout
  • Programmable output based on card validation or as actuator activated by KNX telegrams Delay on card withdrawal configurable for courtesy light management
  • Binary input available for connection of conventional push button (with switching, dimming or roller shutter/shutter function) or signalling contact (e.g. window opening)
  • Front white LED: flashing signal when card not inserted, off when card inserted; LED control via KNX bus telegrams possible
  • Notification of detected presence events to supervisory system with memory buffer
  • Plastic case
  • Connection to bus line via KNX terminal
  • Recessed wall mounting on round box
  • Degree of protection IP20 (installed)
  • Weight approx. 50 g (with mounting bracket)
Configurationa and commissioning

The ekinex accédo software, dedicated to the management of accommodation and hospitality facilities (hotels, residences, guest houses or bed&breakfasts), is required for the programming of access control functions and card programming.

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di piú o negare il consenso a tutti o ad alcuni cookie, consulta la sezione cookies. Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all'uso dei cookie.