8-fold analog/binary input

DIN-Rail mount modules



KNX 8-fold analog/binary input for the connection of potential-free contacts or NTC passive temperature sensors. Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm). Power supply via bus. To be used in KNX installations for home and building automation.

  • ON/OFF switching of single loads or group of loads
  • detecting the state of signaling contacts (from safety devices, alarms, etc.)
  • recalling and saving of scenes
  • sending on the bus of values (temperature, brightness, etc.)
  • switching to forced functioning (lock)
  • counting of impulses and switching cycles
  • dimming of lighting devices
  • operating of shutters and roller blinds
  • measuring of the air mass temperature with a NTC passive temperature sensor (NTC 10 kΩ at 25 °C) with possibility of sending the value on the bus
  • 2 points (ON / OFF) or proportional (PWM or continuous) room temperature regulation
  • 4 logic functions (AND, OR or XOR) with 4 logic objects in input each

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKCA1TP##.knxprod (## = release).